Cold Weather Installation Tips for Adhesives and Primers

As temperatures fall and winter drags on, specifying and handling of building envelope products – especially the adhesives involved – is a top concern.

Low-VOC adhesives and primers contain more water than standard bonding adhesives and primers and can be adversely affected by outside temperatures.

When specifying a low-VOC bonding adhesive or primer for a winter installation time frame, make sure to include information in the specification regarding winter application. This should include a recommendation for heated storage enclosures, or "hot boxes" for jobsite adhesive and primer storage. This practice is strongly recommended when ambient temperatures are expected to fall below 40°F (4°C) for an extended period of time.

Adhesives and primers should be stored in locations where temperatures are between 60°F and 80°F (15°C and 26°C). While working with the adhesives, they should be rotated in hot boxes to ensure the temperature of the product stays above 40°F (4°C). Adhesives may appear gelled or lumpy when left for extended periods of time at temperatures below 40°F (4°C). If this occurs, return the material to room temperature for a minimum of 24 hours prior to use.

In all applications, but especially in colder conditions, emphasize the proper coverage rates for the adhesive or primer being used. Following coverage rates for low-VOC adhesives and primers allows proper flash off and reduces trapped solvents which could lead to membrane blistering.

For colder applications, Flexible FAST™ Adhesive may be necessary. Flexible FAST is a two-part polyurethane foam adhesive which is spray-applied and used with a "fleece-backed" single-ply membrane. The advantage of this system is that it can be sprayed using 15- or 50-gallon drums of Part A and Part B, which can be heated using drum or band heaters. This allows the material to stay warmer during application and lowers the minimum application temperature to 25°F (-4°C).

So on your next cold weather specification for Low-VOC adhesives and primers, include some installation precautions as mentioned. Contact Craig Tyler with questions.