UL Fire Classifications for Roofs - Class A, B, and C
UL tests the fire resistance of roof construction using External Fire Ratings (Class A, B, or C searched for on the UL website using the UL Category Code TGFU) and Internal Fire Ratings (hourly constructions – P numbers searched for on the UL website using the UL Category BXUV). This SpecTopic is going to focus on the External Fire Ratings.
As outlined in the International Building Code (IBC), all roof coverings are required to be tested in accordance with ASTM E 108 or UL 790. The minimum roof coverings installed on buildings shall comply with Table 1505.1 based on the type of construction of the building. This table (recreated from the 2015 IBC) is below. There are a few footnotes on some types of occupancy classifications and project types, so please consult the actual Table 1505.1 in the edition of IBC adopted by your local building official.
TABLE 1505.1 Minimum Roof Covering Classification for Types of Construction
As seen in the table, Class A roofing is not a minimum requirement when used in any Type of Construction; however, many architects today specify Class A roof systems as a way of making sure they meet the minimum code requirement for every project. This practice is certainly acceptable but can be confusing to some architects when asked about the three classes.
Class A fire testing is considered severe fire test exposure, while Class B is considered moderate fire test exposure, and Class C is considered light fire test exposure. Under all of these tests, roof coverings afford a level of fire protection (severe for A, moderate for B, and light for C) to the roof deck, do not slip from position, and are not expected to produce flying brands. These tests are conducted on either combustible or non-combustible roof decks.
The Standard Test Methods for Fire Tests of Roof Coverings, UL 790 (ASTM E108), includes three key tests to provide fire classification of roof covering materials and systems. These are the Spread of Flame Test, Intermittent Flame Test, and Burning Brand Test. During the Burning Brand Test, heat is transferred directly through the roof covering (single-ply, BUR, shingles, etc.) as well as the other roof components (insulation, underlayments, etc.), which protect the roof deck. In most Burning Brand Tests conducted over a combustible deck (3/8- or 15/32- inch plywood), the roof components play a significant role in achieving the fire rating of the overall roofing system. Accordingly, many certifications of roof covering materials describe the specific types of roof components to be used based on the testing conducted.
For more information on which Carlisle membranes meet Class A, B, and C and in what configurations of roofing components, check out our Code Approval Guides for EPDM, TPO, PVC, and KEE HP membranes on the Carlisle SynTec website.
As outlined in the International Building Code (IBC), all roof coverings are required to be tested in accordance with ASTM E 108 or UL 790. The minimum roof coverings installed on buildings shall comply with Table 1505.1 based on the type of construction of the building. This table (recreated from the 2015 IBC) is below. There are a few footnotes on some types of occupancy classifications and project types, so please consult the actual Table 1505.1 in the edition of IBC adopted by your local building official.
TABLE 1505.1 Minimum Roof Covering Classification for Types of Construction
| IA | IB | IIA | IIB | IIIA | IIIB | IV | VA | VB |
| B | B | B | C | B | C | B | B | C |
As seen in the table, Class A roofing is not a minimum requirement when used in any Type of Construction; however, many architects today specify Class A roof systems as a way of making sure they meet the minimum code requirement for every project. This practice is certainly acceptable but can be confusing to some architects when asked about the three classes.
Class A fire testing is considered severe fire test exposure, while Class B is considered moderate fire test exposure, and Class C is considered light fire test exposure. Under all of these tests, roof coverings afford a level of fire protection (severe for A, moderate for B, and light for C) to the roof deck, do not slip from position, and are not expected to produce flying brands. These tests are conducted on either combustible or non-combustible roof decks.
The Standard Test Methods for Fire Tests of Roof Coverings, UL 790 (ASTM E108), includes three key tests to provide fire classification of roof covering materials and systems. These are the Spread of Flame Test, Intermittent Flame Test, and Burning Brand Test. During the Burning Brand Test, heat is transferred directly through the roof covering (single-ply, BUR, shingles, etc.) as well as the other roof components (insulation, underlayments, etc.), which protect the roof deck. In most Burning Brand Tests conducted over a combustible deck (3/8- or 15/32- inch plywood), the roof components play a significant role in achieving the fire rating of the overall roofing system. Accordingly, many certifications of roof covering materials describe the specific types of roof components to be used based on the testing conducted.
For more information on which Carlisle membranes meet Class A, B, and C and in what configurations of roofing components, check out our Code Approval Guides for EPDM, TPO, PVC, and KEE HP membranes on the Carlisle SynTec website.
Up Next
August 12, 2020
SpecTips - How to Add Insulation on a Roof when Space is Limited
Five times the value of typical roof insulation
August 05, 2020
30-Year EPDM Systems - Resilient by Design
One of the major themes in commercial construction is resilient design, which helps to keep buildings functional during and after severe weather events.
July 15, 2020
Jobsite Delivery, Storage, and Handling
Building products are sometimes delivered to the jobsite days or weeks before they are finally ready to be installed. While they are on the jobsite, what are some of the “best practices” a contractor should follow with regards to handling these products before use?